Limited Time Sale$556.50 cheaper than the new price!!
| Management number | 206576403 | Release Date | 2025/11/01 | List Price | $238.50 | Model Number | 206576403 | ||
|---|---|---|---|---|---|---|---|---|---|
| Category | |||||||||
Why AA tunes over others? We have been tuning UTV's with CVT clutches for a long time, longer than almost anyone in our field going back to the 800 RZR. Tuning a CVT vehicle properly is not an easy task as you have so many variables at one time. We spend the time to wheel dyno (with actual UTV tires) correctly per modification, and have advanced ECU calibration and clutching knowledge to do so. Every change in horsepower can result in us changing clutching several times. We also develop most of our supporting mods so we know everything works correctly, and build parts to fit the vehicles needs. Lastly and honestly the most important; we then back up our results with real world data logging on local trails and our facility on 110 acres. It's this combination that truly makes the difference and why AA normally has a faster vehicle with the same or less rated tune horsepower. We left nothing on the table on the Ranger bolt-on parts, if others claim more power/gains for the same mods use caution in believing it
AA/HP Tuners Remote Tuning Device (RTD) w/ECU Unlock for all 2025 Polaris Ranger XP 1000 (82HP Base) 2 door and crew models Standard Unlock Process (Average 4-10 business days): Within 1 business day after purchase, we will send you instructions on sending in your ECU. You will be responsible for shipping the ECU to AA. Once at it arrives at AA, the ECU will take 1-2 business days to complete. Your ECU will then be sent back via standard/your selection of order shipping. Turnaround time greatly varies on your location and how long shipping takes to/from AA in Wisconsin.
Express Unlock Process (Average 2-3 business days): **For the continental US 48 states ONLY** We will send you a UPS Next Day Air label and instructions. You will need to attach this label to your own ECU package, then give the package to your local UPS drop-off location. Once at AA, the ECU will take 1-2 business days to complete. The ECU will then be sent back to you via Next Day shipping. When the ECU arrives, we'll read your stock file and keep a file folder for your stock/tune files. We'll then flash it with the unlock file so it's ready to use with the RTD. All other parts on the express flash order will be shipped ground unless otherwise specified/selected during order checkout. Keep in mind we cannot guarantee same day programming or control UPS shipping times/delays. We will do everything possible to turn the ECU around as fast as possible.
Looking for the best/most badass ECU tuning available for your Ranger? AA's performance tunes are readily available to gain horsepower and torque. Through our advanced ECU tuning we are able to modify parameters correctly to gain you the power needed. We are highly experienced in tuning UTV's and this will show. We were the first to flash the Polaris MG1 ECU, and spent a huge amount of time in R&D to develop the most powerful ECU calibrations (tunes) possible.
Level 1 87 Octane: This tune can be run on a bone stock Ranger on 87+ octane fuel. This tune adds +3 RWHP (4-5 crank HP) putting you at roughly 88 crank horsepower with just a flash! Add clutching and you are a huge 8-9rwhp above OEM! We would highly suggest our S3 clutch kit with this tune as it loads the Ranger better down low for torque, allows peak RPM to ramp up faster in the mid/high end, and has slightly higher peak RPM for better peak power. This tune can be run with an aftermarket exhaust without any issue, but our Level 2 tune is the best option for aftermarket exhaust as it's slightly richer for more power and less heat.
Level 1 91-93 Octane: This tune can be run on a bone stock Ranger on 91-93 octane fuel. This tune adds +5 RWHP (7-8 crank HP) putting you at roughly 90 crank horsepower with just a flash! Add clutching and you are a huge 10-11rwhp above OEM! We would highly suggest our S3 clutch kit with this tune as it loads the Ranger better down low for torque, allows peak RPM to ramp up faster in the mid/high end, and has slightly higher peak RPM for better peak power. This tune can be run with an aftermarket exhaust without any issue, but our Level 2 tune is the best option for aftermarket exhaust as it's slightly richer for more power and less heat.
Level 2 87+ Octane: This tune is developed for an Ranger with aftermarket exhaust on 87 or greater octane. We have fueling and timing added as possible due to the lower exhaust temps and higher flow. Power gains vary depending on exhaust, but usually we see a massive +8-10hp with our AA exhaust. Due to how these motors/tuning works, this tune should work with about any aftermarket exhaust, but was tested and designed with our AA Slip-On Exhaust.
Level 2 91-93 Octane: This tune is developed for an Ranger with aftermarket exhaust on 91-93 octane. We have fueling and timing added as possible due to the lower exhaust temps and higher flow. Power gains vary depending on exhaust, but usually we see a massive +10-12hp with our AA exhaust. Due to how these motors/tuning works, this tune should work with about any aftermarket exhaust, but was tested and designed with our AA Slip-On Exhaust.
If you notice any omissions or errors in the product information on this page, please use the correction request form below.
Correction Request Form